Home » Power » AC/DC POWER ADAPDTERS » 300 mA AC/DC Adapter 1.5V-12VDC

300 mA AC/DC Adapter 1.5V-12VDC

300 mA AC/DC Adapter 1.5V-12VDC

Details
Here's a device that conserves batteries conveniently and reliably on most equipment. This adapter plugs into ordinary 120VAC 60 Hz house current. Choose any of the available voltages. Has built0in polarity reversal switch. Employs a full wave bridge rectifier, with 1000mfd filter capacitor for good regulation and lowest hum level. Six interchangeable plugs are included with the unit to serve most power-up needs.

Includes:



2.5mm



3.5mm



2.1mm x 5.5 mm



2.5mm x 5.5mm



1.35mm x 3.5mm



1.7mm x 4.0mm



Specifications:



9 Volt battery snap adaptor
Code PH-BE226  
Weight 2.00 lbs
 
Our price: $13.95
Quantity   
: *
: *
: *
Type the characters you see in the picture:


*
SOLDERLESS TERMINALS., Female Bullet Receptacles .195" 12-10AWG Fully Ins. {8PK}
HEAT SHRINK 2 IN DIA THIN WALL BLUE 25 FT SPOOL
TRIAC-50VRM 25A TO-48 IGT=75/100MA
SOLDERLESS TERMINALS., Female Bullet Receptacles .195" 12-10AWG Fully Ins. {8PK} HEAT SHRINK 2 IN DIA THIN WALL BLUE 25 FT SPOOL TRIAC-50VRM 25A TO-48 IGT=75/100MA
$1.89
$43.99
$7.65
 
SILICON CONTROLLED RECTIFIER- 50VRM 10A TO-220 IGT=15MA
POWER MOSFET N-CHANNEL 900V ID=5A TO-3P CASE HIGH SPEED SWITCG ENHANCEMENT MODE RDS=3.6 OHM
Jumper Wire Male-Female 10pcs
SILICON CONTROLLED RECTIFIER- 50VRM 10A TO-220 IGT=15MA POWER MOSFET N-CHANNEL 900V ID=5A TO-3P CASE HIGH SPEED SWITCG ENHANCEMENT MODE RDS=3.6 OHM Jumper Wire Male-Female 10pcs
$2.05
$6.98
$3.99
 
Snap-in Tamper Sw
HEAT SHRINK 1 IN DIA THIN WALL BLUE 25 FT SPOOL
SILICON CONTROLLED RECTIFIER 1600VRM 80A TO-65 IGT=100 MA
Snap-in Tamper Sw HEAT SHRINK 1 IN DIA THIN WALL BLUE 25 FT SPOOL SILICON CONTROLLED RECTIFIER 1600VRM 80A TO-65 IGT=100 MA
$5.95
$18.99
$44.29

Product rating

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*

News

02-04-2013
Arduino sparksfun.

All news   

Special

Need help?