Home » Parts & Components » RELAYS » REMOTE CONTROL RELAYS » 2 Zone 12VDC 15A Remote Control

2 Zone 12VDC 15A Remote Control

2 Zone 12VDC 15A Remote Control
This is a 2-zone (2-Channel)12VDC ON and OFF relay controlled by one keychain style handheld transmitter. There are 2 sets of ON and OFF keys, total 4keys to individually control the two zones.
the keychain style transmitter was made with a solid metal frame and a sliding protection cover to avoid the accidental press of the keys.

Features
This is a 2 zone receiver with 1 transmitter. The 2-zone outputs are controlled by two sets of keys on the transmitter with On and Off function. Here is the key function and output chart:
Left Output Zone 1 Reception, left upper key ON, left lower key OFF.
Right Output Zone 2 Reception, right upper key ON, right lower key OFF

Specification
Voltage: 12DC Volt +/- 10%
Current: 15Amp
Output: 180Watts
Range: 30Meter (no obstacle in range)
Frenquency: 315MHZ
Temperature: 0-50 Celius
Size: 64x46x23MM(receiver enclosure)
Coding: Fixed Code (remote transmitter)
Receiver Wiring:
Red: +12VDC In
White: +12VDC Out
Black: Ground
Black: Ground
Blue: Antenna

handset Controls: On and Off Buttons

Code RM-022A  
Weight 1.00 lbs
 
Our price: $42.99
Quantity   
: *
: *
: *
Type the characters you see in the picture:


*
15AMP BREAKER
ZENER DIODE - 5.6V 300MW 5% SOT-23
6 Piece Plastic Tuning Needle Set
15AMP BREAKER ZENER DIODE - 5.6V 300MW 5% SOT-23 6 Piece Plastic Tuning Needle Set
$7.95
$0.97
$8.99
 
.0039UF MYLAR 100V
SWITCH
HEAT SHRINK 5/16 IN DIA THIN WALL CLEAR 100 FT SPOOL
.0039UF MYLAR 100V SWITCH HEAT SHRINK 5/16 IN DIA THIN WALL CLEAR 100 FT SPOOL
$1.29
$9.95
$34.99
 
ZENER DIODE - 5.6V 1/2W 5% DO-35
Triple Axis Compass Magnetometer Sensor Module For Arduino 3V-5V
EZ-RJ45® Crimp Tool
ZENER DIODE - 5.6V 1/2W 5% DO-35 Triple Axis Compass Magnetometer Sensor Module For Arduino 3V-5V EZ-RJ45® Crimp Tool
$0.79
$7.99
$62.99

Product rating

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*