Home » Chemicals » MG CHEMICALS » Copper Etchant

Copper Etchant

Copper Etchant

Ready to use solution designed for etching printed circuit boards and other metals. Recommended for use with M.G. Chemicals Professional Etching Process Kit (416-E) and M.G. Economy Etching Process Kit (416-ES).
Note: Do not dilute this product with water.

Directions

Immerse copper board in solution and agitate until etching action is completed. Ferric Chloride can etch up to a maximum of 100g of copper per liter of solution (.33 square meters or 3.5 square feet of 1 oz copper clad board). Etching process can be sped up by heating the solution to a temperature no higher than 55°C (135°F).

Code MG-415-500ML  
 
Our price: $15.99
Quantity   
: *
: *
: *
Type the characters you see in the picture:


*
SOLDERLESS TERMINALS., Ring 16-14AWG #10 Stud
HEAT SHRINK 1 IN DIA THIN WALL YELLOW 25 FT SPOOL
HEAT SHRINK 5/16 IN DIA THIN WALL GREEN 100 FT SPOOL
SOLDERLESS TERMINALS., Ring 16-14AWG #10 Stud HEAT SHRINK 1 IN DIA THIN WALL YELLOW 25 FT SPOOL HEAT SHRINK 5/16 IN DIA THIN WALL GREEN 100 FT SPOOL
$9.95
$18.99
$34.99
 
ZENER DIODE - 8.7V 5W 5% AXIAL LEADED
SOLDERLESS TERMINALS., Q.D. .375" Female Tab 12-10AWG Fully Insulated
CAP 470UF 25V
ZENER DIODE - 8.7V 5W 5% AXIAL LEADED SOLDERLESS TERMINALS., Q.D. .375" Female Tab 12-10AWG Fully Insulated CAP 470UF 25V
$2.18
$24.95
$1.95
 
HEAT SHRINK 1/2 IN DIA THIN WALL YELLOW 50 FT SPOOL
HEAT SHRINK 1/8 IN DIA THIN WALL CLEAR 50 FT SPOOL
ZENER DIODE - 150.0V 1W 5% DO-41/DO-15
HEAT SHRINK 1/2 IN DIA THIN WALL YELLOW 50 FT SPOOL HEAT SHRINK 1/8 IN DIA THIN WALL CLEAR 50 FT SPOOL ZENER DIODE - 150.0V 1W 5% DO-41/DO-15
$28.99
$14.99
$1.65

Product rating

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*