Home » Arduino » GPS Shield Retail

GPS Shield Retail

GPS Shield Retail
A connector for the popular EM-406 GPS receiver is populated on the board, and footprints for EM-408 and EB-85A connectors are also made available (connectors are not included and can be found below in the related items). There is also a spot for the UP501 GPS module. The regular GPS pins (RX, TX, PPS, etc.) are also broken out to a 10-pin 0.1" pitch header, and a small protoyping area is also provided.

The DLINE/UART switch switches the GPS module's input/output between Arduino's standard TX/RX pins or any digital pins on the Arduino (default setting uses pins 3 and 2 connected to TX and RX, respectively). The DLINE/UART switch must be set to DLINE in order to upload code through the Arduino IDE.

The shield also includes the footprint for a 12mm coin cell battery holder to provide battery backup to the optional EB-85A GPS module.An ON/OFF switch is included which controls power to the GPS module. Additionally, the Arduino reset switch is also brought out.

Includes:
• GPS Shield
• EM-406 GPS Module
• EM-406 Interface Cable
• Set of Stackable Headers

Features:
• EM-406 connector populated
• EM-408 and EB-85A connector footprints provided and connected for optional use
• UP501 connector and footprint
• Coin cell battery socket footprint provided and connected for optional battery backup of EB-85A GPS module
• Standard Arduino sized shield
• Prototyping area
• GPS serial and PPS signals broken out to a 0.1" header for additional device connections
• Arduino reset button
• DLINE/UART switch controls serial communications
• ON/OFF switch controls power to GPS module

Documents:
•Schematic
•Eagle Files
•GPS Quickstart Guide
•Assembly Guide
•Example Sketch
Code SE-RTL-10709  
Weight 1.00 lbs
 
Our price: $79.99
Quantity   
: *
: *
: *
Type the characters you see in the picture:


*
SWITCH
SNAP ACTION MOM LEVER
SILICON CONTROLLED RECTIFIER- 300VRM 4A TO-202 SENITIVE GATE IGT=200UA
SWITCH SNAP ACTION MOM LEVER SILICON CONTROLLED RECTIFIER- 300VRM 4A TO-202 SENITIVE GATE IGT=200UA
$7.95
$4.95
$1.96
 
ZENER DIODE - 27.0V 1/2W 5% DO-35
RELAY
SUB MIN MOM W/ARM
ZENER DIODE - 27.0V 1/2W 5% DO-35 RELAY SUB MIN MOM W/ARM
$0.79
$6.95
$3.29
 
SWITCH
ZENER DIODE - 87.0V 5W 5% AXIAL LEADED
ELECTROSOLVE CONTACT CLEANER
SWITCH ZENER DIODE - 87.0V 5W 5% AXIAL LEADED ELECTROSOLVE CONTACT CLEANER
$15.95
$2.18
$15.95

Product rating

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*

News

02-04-2013
Arduino sparksfun.

All news   

Special

Need help?