Home » Arduino » The RedBoard - BreadBoard Kit

The RedBoard - BreadBoard Kit

The RedBoard - BreadBoard Kit
We've put together all the parts you will need including an ATmega328 preloaded with the Uno bootloader. The breadboard overlay makes it easy to hook everything up correctly. Once you are finished, you will have a fully functioning Arduino-compatible controller on a breadboard.

An instruction booklet is included. Previous experience with a breadboard and electronics is recommended but not absolutely necessary.

Note: You will need an FTDI basic for loading code and communicating with the board. Check the related products down below.

Includes:
• Assembly guide
• Clear breadboard
• Jumper wires
• Breadboard overlay
• ATmega328 with Uno bootloader
• All other components necessary to get up and running
Code SE-RTL-11039  
Weight 1.00 lbs
 
Our price: $26.99
Quantity   
: *
: *
: *
Type the characters you see in the picture:


*
#1 #2 DBL ENDED 6" SQ BIT
PUSH  BUTTON BOOT
HEAT SHRINK 3/16 IN DIA THIN WALL CLEAR 50 FT SPOOL
#1 #2 DBL ENDED 6" SQ BIT PUSH BUTTON BOOT HEAT SHRINK 3/16 IN DIA THIN WALL CLEAR 50 FT SPOOL
$12.99
$2.95
$16.99
 
ZENER DIODE - 33.0V 10W DO-4 5% CATHODE CASE
INTEGRATED CIRCUIT CMOS EXPANDABLE 4-WIDE 2-INPUT  AND/OR INVERT GATE 14-LEAD DIP
Two-Piece Inset Wall Plate with 4 Inch Built-in Flexible High Speed HDMI� Cable With Ethernet Exte
ZENER DIODE - 33.0V 10W DO-4 5% CATHODE CASE INTEGRATED CIRCUIT CMOS EXPANDABLE 4-WIDE 2-INPUT AND/OR INVERT GATE 14-LEAD DIP Two-Piece Inset Wall Plate with 4 Inch Built-in Flexible High Speed HDMI� Cable With Ethernet Exte
$16.10
$2.32
$14.95
 
HEAT SHRINK 3/4 IN DIA THIN WALL RED 100 FT SPOOL
ZENER DIODE - 10.0V 50W DO-5 5% CATHODE CASE
ZENER DIODE 22.0V 10W DO-4 5% CATHODE CASE
HEAT SHRINK 3/4 IN DIA THIN WALL RED 100 FT SPOOL ZENER DIODE - 10.0V 50W DO-5 5% CATHODE CASE ZENER DIODE 22.0V 10W DO-4 5% CATHODE CASE
$51.99
$26.86
$16.10

Product rating

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*